Need help? We've got you covered.
We’ve shared some of our most frequently asked questions to help you out!
ARC Tabs are made to work on any dent large and small. Our Tabs main benefits is to prevent inner coat damage caused by welding washers that burns through. It works on steel and a great tool to work on aluminum.
ARC Tabs reduces repair time. It also reduces the R&I process by 80%. It prevents fire from foam and other flammable materials.
It takes a technician 5 minutes to start pulling and minimizing damages. Technicians can do their jobs with ease and less effort.
ARC Tabs are mainly made to work for auto body and collision repair shops and technicians. PDR tabs has been there for so many years but our GPR/PDR tabs are designed to be used for any dent repair and work better than most traditional dent pulling systems.
It is also important to keep in mind that it is also a great solution for aluminum dent repair.
Yes, ARC tabs are designed to last for years if used properly by a technician. Technicians are advised clean up the panel with alcohol then warm up the panel and the tabs with a heat gun (5-10 Seconds/each) before applying glue.
While some aluminum car panels requires heating, other does not. It’s not true that all aluminum panels of all cars are supposed to be heated while pulling, some manufacturers allow only glue pulling for aluminum repair or else replace the part.
ARC tabs will work with or without heating. It heating is needed, technicians are advice to water spray the tab and heat the damaged area with a heat gun and pull at the same time.
91% rubbing alcohol that can be found in any drugstore at a decent low price ($3-$8/bottle)
Yes, we offer up to 6 months financing through PayPal. After choosing your product, click on the cart button and then click on PayPal Credit. Follow the instructions.
We recommend buying our Ultimate ARC Kit for $750 that includes all the tabs needed to pull any dent and finish the job. It also includes a Temperature control glue gone that heats our glue sticks properly for best results. A heave duty slide hammer and an adjustable hand puller.
We have kits price range between $95.00 up to $750.00.
Another option is to build your own kit here in our website when you click on the “build you own kit” button in the home page.
Our second recommendation is buying our pullers. We have a range of double tension pullers that are well tested and will be a great addition to your kit.
Please visit our website shop for details or call us for any question.
For more info please call or test us at +1 347-458-2263.
